Sealers and densifiers for concrete protection, dust proofing, and appearance used where a full coating system isn’t required.
Dust Proofing
Stain Protection
Appearance
Standalone
Dust Proofing
Stain Protection
Appearance
Standalone
Where It Fits
Primer Use
Best when: Not applicable Sealers and densifiers are not used as primers for coating systems.
Watch out: Not applicable to sealer or densifier applications.
Build and Body Coat Use
Best when: Not applicable These products provide surface protection only, not structural build or thickness.
Watch out: Do not provide impact resistance or wear thickness comparable to coating systems.
Topcoat Use
Best when: Often a 'standalone' protection layer for concrete providing dust proofing, stain resistance, and appearance enhancement without a full coating system.
Watch out: Performance limitations compared to full coating systems. Suitable for light duty use only.
Common Applications
Typical environments where sealers and densifiers provide appropriate protection.
Key questions to answer before specifying a sealer or densifier.
Desired finish
Sealers range from invisible penetrating treatments to high gloss film forming coatings. Match the finish to the facility's aesthetic requirements and maintenance expectations.
Traffic level
Forklifts and heavy rolling loads will quickly wear through topical sealers. Define the expected traffic intensity pedestrian, light cart, or heavy industrial before specifying.
Stain resistance needs
Oil, grease, and chemical spills require specific sealer chemistries. Penetrating densifiers resist staining differently than film forming sealers confirm the protection level needed.
Maintenance plan
Topical sealers require periodic reapplication. Confirm the facility has the resources and commitment to maintain the floor's appearance and protection over time.